PV300 Solar Pump Inverter DC Voltage Pump Drive MPPT Solar Vfd Gprs Remote Solar Inverter For Pump
The PV300/800 series solar pump inverter is a green energy products with new solar MPPT technology, which developed based on pumps frequency inverter (VFD), focusing on driving 1 phase or 3 phase AC pumps including AC induction pumps or high efficiency pumps with permanent magnet synchronous motor (PMSM) technology.
Compare to on grid or off grid solar inverter, it has soft starter, and multiple functions of motor protection, and very high competitive price.
Product Features
Suitable for driving all 1/3 phase induction AC pumps, for PMSM high speed pumps is option.
- Multiple control modes, local control, auto start/stop, GPRS remote control.
- Maximum power point tracking (MPPT) with fast response speed and stable operation
- Dry run (under load ) protection, Water tank fulling detect, Maximum current of pump protection
- Low stop frequency protection, sleep/ wake up function when lack/enough of sunlight radiation.
- Dual mode input, compatible with DC and AC power input, low and wide range voltage input.
- The PQ (Power/Flow) performance curve enables calculating the flow output from the pump
- Multiple pumps protection function, short circuit, phase missing, over current, over voltage...
- Ambient temperature for using: -10 to +55˚C.
PV300/PV800 Solar pump system include solar panels arrays, solar pump inverter and AC 1/3 phase pumps, and other accessories, such as combiner box, DC circuit breaker, AC/DC manual switchover, AC circuit breaker....
Solar pump system features
- High flow system for faster tank fill and significant water output with MPPT function.
- ·Proven motor and pump technology for long-term reliability
- ·Available free of cost at your doorstep, one times investment for more than 20 years free using
- ·Clean and pollution free energy, eco-friendly.
- ·Ideal for remote areas, where electricity is not available or availability is capital intensive.
- ·Suitable for day time irrigation, continuous supply for 8-12 hours in a day.
- ·Soft start feature prevents water hammer and increases system life easy to operate.
- ·Simple installation and maintenance free.
- Hybrid input is avaiable.
PV300 solar pump inverter models list
| SN | Models | Rate current (A) | Voltage | Rated Power(kw) pumps | Size |
| 220V±15% Input, 0-V(Max input) |
| 1 | PV300-2S-0K75G | 4A | 220V | 0.75 | 185*75*145 |
| 2 | PV300-2S-1.5G | 7A | 220V | 1.5 | 185*75*145 |
| 3 | AD300-2S-2.2G | 9.6A | 220V | 2.2 | 185*75*145 |
| 380V±15% Input, 0-V(Max input) |
| 1 | PV300-4T-0.75G | 2.1A | 380V | 0.75 | 185*75*145 |
| 2 | PV300-4T-1.5G | 3.7A | 380V | 1.5 | 185*75*145 |
| 3 | PV300-4T-2.2G | 5.1A | 380V | 2.2 | 185*75*145 |
| 4 | PV300-4T-3.0G | 7.2A | 380V | 3.0 | 185*75*145 |
| 5 | PV300-4T-4.0G | 10A | 380V | 4.0 | 185*75*145 |
PV300 solar pump inverter specification as below
| PV300 Specification of Solar pump inverter specification when parameters H9.00 set to for 1. |
| Recommended MPPT voltage range | Vmp154 to 285vdc for 1S ( for driving 110VAc pumps) Vmp 260 to 355VDC for 2S ( For driving 220VAC pumps ) Vmp 486 to 650 VDC for 4T (For driving 380VAC pumps) |
| Recommended input Voc and Vmpp voltage | Voc 355(VDC), Vmpp 310(VDC) for 2S model or 220V AC pumps Voc 620(VDC), Vmpp 540(VDC) for 4T model or 380V AC pumps |
| Motor(pump) type | Control for permanent magnet synchronous motor (PMSM ) Asynchronous motor pumps ( all type 3 phase induction motor) |
| Rated output voltage | 1/3-Phase,110V/160V/220V. 3-phase, 220V/380V/460V |
| Output frequency range | 0~Maximum frequency 400Hz. |
| Efficiency | 99.2 to 99.8% |
| Over load capacity | G type for submersible pumps, 150% rated current for 60s, 180% rated current for 3s P type for surface pump, 120% rated current for 60s, 150% rated current for 2s. |
| Solar pump control special performance | MPPT ( maximum power point tracking),auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected. |
| Protection function | Phase loss protection, phase short circuit protection, ground to phase circuit protection , input and output short circuit protection. Stall protection, lightning protection, over heat protection. |
| Protection degree | IP20, Air force cooling |
| Running mode | MPPT or CVT |
| Altitude | Below 1000m; above 1000m, derated 1% for every additional 100m. |
| Standard AC input backup circuit | CE, IEC,Design based on AD800 series high performance inverter, more specification please refer to AD800 series vector control inverter operation manual |
PV300 solar pump inverter specification
| H9 solar pump control special parameters |
| H9.00 | Solar pump control | 0:Invalid 1:Enable When it set to 0, the solar pump control function is disable, it used for normal motor speed control VFD. When it set to 1, the solar pump control function is activate, H9 and HF group parameters is useful. DI#51 solar pump control disable set by terminal function is priority than this setting. | 1 |
| H9.01 | Vmpp voltage reference | 0: Voltage reference (CVT) The reference voltage is set by H9.02, it is a constant value, the target frequency will increase tar wards to H9.04 upper limit frequency of PI when DC voltage is higher than H9.02, and target frequency will decrease tar wards to H9.05 lower limit frequency of PI when DC voltage is lower than H9.02. 1: Max. power point tracking(MPPT) When it set 1, adopt MPPT function, inverter always pursuing maximum power point. H9.02 value is chaning always due to MPPT function, C0.34 can monitor the MPPT voltage value(H9.02 value) Whatever control model has been selecting, the target frequency will change towards to upper limit of PI, when the DC bus voltage is lower than this setting, the target freqeuncy will change towards to lower limit of PI output frequency. | 1 |
| H9.02 | Vmpp set by keypad reference | 0.0～1000Vdc When H9.01=0, the DC bus control voltage target setting. When H9.01=1, MPPT calculating entry point setting. If user set it for actual Vmp of solar arrays, or 80% of Voc value, the inverter can able to quick enter MPPT calculating for better performance. | 280/530 |
PV300 solar pump inverter installattion step
Product Tags:
|
|
MPPT Hybrid Solar Pump Inverter Images
|
