| Input DC voltage (Voc) (VDC) | Voc 90-450VVDC input, for 1S Inverter, 90V/110VAC pump
Voc 150-450VDC for 2S Inverter, 1/3 phase 220VAC pump
Voc 250-800VDC for 4T Inverter, 3 phase 380/440VAC pump Voc 250-900VDC for 5T Inverter, 3 phase 460/480VAC pump. |
| Input AC voltage (VAC) | 110VAC for 1S Inverter. 220V for 2S inverter. 380/440/480V for 4T/5T Inverters. |
| Max DC input voltage (VDC) | 440VDC for 1S/2S Inverters, 800VDC for 4T inverters. 900VDC for 5T Inverter |
| Motor type | AM, PMSM |
| Rated output voltage | 1/3-Phase,0-110V/220V. 3-phase, 0-220V/380V/460V |
| Output frequency range | 0~50/60HZ. (0-600HZ for PMSM) |
| MPPT efficiency | More than 99.5%, |
| Ambient temperature range | G-type for submersible pumps, 150% rated current for 60s, 180% rated current for 2s .
P type for general pumps, 120% rated current for 60s, 150% rated current for 2s |
| Solar pump control special performance | MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected |
| Protection function | Phase loss protection, phase short circuit protection, ground to phase circuit protection , input and output short circuit protection. Stall protection, lightning protection |
| Protection degree | IP20, Air force cooling (IP54 & IP65 is optional) |
| Running mode | MPPT or CVT |
| Altitude | Below 1000m; above 1000m, derated 1% for every additional 100m. |
| Enhanced version of AC drive | CE, Design based on vector control motor AC drive, more specification please refer to S600 or S600 vector control drive operation manual |
| Technical specification of variable frequency inverter when PE00=0(solar pump disable) |
| voltage, frequency | 1 phase 220V, 3 phase, 220V,380V, 660V, 0-50/60Hz |
| Control mode | 0: VF control ; 1: Open loop vector control mode
2: Close loop vector control mode |
| Maximum frequency | 0-600Hz in vector control mode, or for PMSM. |
| Multiple-functions | PID Control, VF control, Current Limiter, Speed Search, Momentary Power Loss Restart,16 Step Speed (Max), 3-Wire connection, Slip Compensation, Frequency Jump, DC braking, Upper/Lower Frequency, Torque control, Compatible for PMSM and IM, built in RS485. |
